20
7.5.2 Event Logs
In the submenu Event Logs all the Logging events are listed. For example, when the Actual shaft Power
is exceeding the EEXI Power limit, the event will be listed in this Event log menu.
The user can Verify an event by touching the
Verify event
button. In this submenu the Start time and
End time will be shown. You can choose a reason why the power reserve is used.
The following pre-set reasons can be chosen:
-
Weather or ice-conditions
-
Saving a life at sea
-
Pirate avoidance
-
Maintenance
-
Other (please fill in below)
This can only be done once the logging state has been left.
It is possible to add Additional information to the Event log.
Figure 20
– Event Logs, event log not verified yet
Figure 21
– Verification of the event log Power above limit
When the event is verified by selecting a reason, the red cross (
❌
) turned into a green checkmark (
✔
)
.
It is possible to print the report of the Event Log via a connected external PC. If no printer is available
you could download the Event Report as a PDF-file and save it.
In the Shaft power limitation Event Report important data like Ship IMO, Duration of Power reserve, Start-
and end time, start- and end position and the reason of the Power reserve use. An Example of an Event
Report is shown in the attachment.
Figure 22
– Event log is verified and could be printed
Figure 23
– Shaft power limitation event report
NOTE:
Downloading the report as PDF is not possible with browser Internet Explorer.
