Toolbar Check
Condition
Check Specification
Comments
Ok
Repair
Replace
Hitch pin & safety
chain
Check for wear or damage
Air pack / Manifold
Check for defects / damages
turn primary hoses as
required
Check towers &
secondary hoses
Check loose hardware or
kinked hoses
Blockage ECU’s
Inspect, confirm ecu acoustic
tubes are not kinked
or damaged
Shanks
Check condition and torque
throughout toolbar
Hydraulic System
Check for any leaks or
defects on valve blocks and
openers
Check seed & fertil-
izer boots
Check wear, adjust if needed,
tighten hose clamps
Check toolbar tires
/ wheels
Adjust pressure / Check
condition & wheel torque
Wing Cylinders
Check for any visible defects or
leaks. Confirm correct wing
pressures are present
Castors
Check castor plate to
weldment gap is less than
1/8th inch. Adjust as required
Frame
Check for any visible defects
Grease
Grease all hubs, castors, pivot
points, packer wheels and re-
pack spindles as per service
manual
Torques
Check all main wing and center
wing torque
Safety decals
and lights
Check for any visible defects /
confirm operation