Turning on the machine
Select the switchbox on the RH side
of the operate screen. In here you
will see you bins and sections. Turn
the product on by pushing on the
bins one at a time. A green light will
appear on each button. For chained
or combined tanks, the button on
only one of the tanks will need to be
pushed to turn it on.
Once the tanks are on the sections
must be engaged to operate the
machine.
Turn your sections on by either
selecting the green “All On” button ,
or engage SCT using the blue “All SCT”
button
When section lights are green, it
means that the machine is on, and will
dispense seed and engage openers
regardless of being on or around
seeded ground. Blue light will appear
directly below the green when SCT
mode is engaged. In SCT mode the
machine will only operate providing
that it see’s ground speed and a GPS
signal.
You can also operate the sections
individually by pressing the
corresponding button on the screen.
Important tips
: if you are in SCT
mode, the first push of the button
will turn it to on, so a double tap is
required to turn off. You must also
push “All SCT” to re-engage any
sections back into SCT mode.
From the operate screen you can
identify the machines state of
operation by the light bar.
The top row indicates opener section
operation, while the bottom row
indicates tank section operation.
Green is on, Blue is SCT mode and
Grey is off.
The section number also indicates
if there is a blockage. When the
numbers are white, that means
everything is working properly. If
the numbers turn red, it indicates a
blockage on that section. Refer to the
blockage page to determine which
runs are plugged. One the blockage
page, the lights above each individual
opener number indicate fertilizer, and
the ones below indicate seed.
