Vaderstad RAPID RDA S Series, Руководство пользователя

Страница: 12 / 118

Instructions and settings
12 Ver.3 29/06/07
2.3 Installation of the Control Station on the tractor
Be sure to install the control box securely in the tractor cab. Place the control box within the field
of vision while looking in the travelling direction. Install the bracket as shown in the figure.
NOTE! Check for hidden cables before drilling holes in the tractor cab.
Connect the cables: Brown to positive (+) and blue to earth (-).
NOTE! The polarity must not be reversed. If the tractor has an electric socket in the cab, use this.
If there is no socket, connection must be made using an extra cable, preferably 6 mm
2
.
Do not use
a cigarette lighter socket
as the current requirement may be as high as 20 A. It is important to
make a secure connection since poor contact will cause malfunction.
Make sure that the connecting cable to the drill is not trapped under the rear window of the tractor
as this may cause damage. Use a hatch or a hole. Clamp the cable securely onto the tractor to pro-
tect the Control Box from damage if the driver forgets to unscrew the connecting cable when un-
hitching the drill.
Figure 2.4 Figure 2.5