Vaderstad NZ Aggressive NZA 600 Series, Оригинальное руководство пользователя

Страница: 24 / 50

Instructions and adjustments
24 11.07.2011
ver. 2
3.4 Adjusting hose length
The cultivator is equipped with an adjustable hose clamp.
Adjust the hoses to a suitable length and tighten the wingnuts.
When the work is completed, attach the quick connectors to the upper holes or slots in the hose
holder.
3.5 Adjusting the reverse-action valve
Figure 3.7
Applies to NZA 500-1000.
The reversing valve controls the hydraulics between the wing folding action and Crossboard.
When the harrow is lowered into the work position, the hydraulics are engaged to the Crossboard;
when the harrow is raised onto its wheels, the hydraulics operate the wing folding action.
Lever A should always be in the end position for transport and harrowing. This is adjusted by slid-
ing valve bracket B forwards or rearwards and also by changing the position of the spring in the
holes on upright C.
After adjustment, the bolts securing valve bracket B should be tightened to prevent the valve from
sliding out of position.
Figure 3.5 Figure 3.6