WideSHOT WallVIEW Mini
WideSHOT WallVIEW Mini, Document Number 342-0710 Rev A
Page 18 of 32
Screen Shot: Admin Menu - Camera Settings Page
(Adjustable in web server mode only)
The Camera Settings page provides the parameters to allow the end user to match the camera to the
environment, set the CCU presets and make startup assignments.
1) Load Preset at Startup:
Check this box to move the camera
to a predefined
preset when the camera
powers up. The WideSHOT is a manual camera and will not use this parameter.
2) Load CCU Scene at Startup:
Check this box to load a CCU Scene into the camera when the camera
powers up. The pull down menu will allow the selection of one of the 6-factory scenes, or any of the 3-user
defined scenes.
3) CCU
Scenes:
Click on any of these 9 buttons to load one of the CCU scenes into the camera. These
scenes can be fine-tuned if changes are needed, and stored into any of the three admin defined scenes.
4) Color Settings:
When painting or shading camera scenes for specific lighting situations or environments,
these attributes can be adjusted for matching cameras in the same area. The parameters within the Color
Settings section are defined below (top to bottom):
Auto Iris check box:
When checked, the camera will operate in Auto Iris mode, when unchecked, the
camera will be in Manual Iris mode and allow adjustment of Iris and Iris Gain levels.
Iris:
Move adjustment slider as required to adjust the Iris opening. A numeric value will be displayed in the
box to the right of the slider.
➊ ➋
➌
➍
➎
