VADDIO SQUIGGLE BOARD 999-5446-000, Инструкция по установке и эксплуатации

Страница: 8 / 16

Squiggle Board
Squiggle Board Manual 342-0069 Rev. C Page 8 of 16
Step 9 - The “Seems Obvious” Step: Put the provided batteries in the Digital Pen Sleeve and the Digital Eraser.
•
Pen: Twist the pen sleeve cap counter-clockwise and put two (2) CR2032 batteries provided, stacked
positive (+) side up, and return the cap. Put the bullet nose black marker in the pen sleeve.
•
Eraser: With a coin, twist the digital eraser cap counter-clockwise and put two (2) CR2032 batteries
provided, stacked positive (+) side up and return the cap.
Step 10 - Setting the 5-Position Dip Switch:
The Squiggle Quick-Connect Interface has a 5-position dip switch accessible on the rear panel. The switch settings
are on the following table:
Example Set-ups:
•
HD, 720p/59.94, Color Bars Off: SW1 = UP, SW2 = UP, SW5 = UP
•
SD, 480i/NTSC, Color Bars Off: SW1 = DN, SW2 = UP, SW5 = UP
•
HD, 720p/50, Color Bars Off: SW1 = UP, SW2 = DN, SW5 = UP
•
SD, 576i/PAL, Color Bars Off: SW1 = DN, SW2 = DN, SW5 = UP
Notes: Default Position for all Switches is UP = HD, 720p/59.94, SMPTE Color Bars OFF.
Switches 3 and 4 are not used and are for future use.
The Color Bars are a video testing convenience only.
Using the Squiggle Board:
Upon connection and powering up the Squiggle Quick-Connect Interface, the System will boot up and the Vaddio
splash screen will be seen on the 720p or SD display device.
Automatically, the Software Version number, MAC address and the legal notices are displayed briefly. The MAC
will be needed as the Ethernet functions are added to the software and for technical support.
Dip
Switch
1 2 3 4 5
UP HD
HD - 720p/59.94 or
SD - 480i/29.97 - NTSC
- -
SMPTE Color
Bars OFF
Down SD
HD - 720p/50 or
SD - 576i/25 - PAL
- -
SMPTE Color
Bars ON
UP -
↑
Down -
↓
5-Position Dip Switch
Accessible from the rear
panel of the Quick-Connect
Interface