VADDIO SQUIGGLE BOARD 999-5446-000, Инструкция по установке и эксплуатации

Страница: 5 / 16

Squiggle Board
Squiggle Board Manual 342-0069 Rev. C Page 5 of 16
Squiggle Quick-Connect Interface Front Panel (left to right):
1) USB Drive Port:
The USB port on the front panel allows the user to plug in any standard FAT32 or Fat16 USB
drive to store content written on the whiteboard. Simply press the One-TOUCH Image Save icon on the Digital
Control Panel (see previous page) and the content written on the whiteboard will be saved to the USB drive. A
confirmation of the saved content will be displayed on the video output. All information is saved as a 1280 x
720 JPEG image.
2) Power Indicator / System Reset Button: When the Squiggle Quick-Connect Interface is turned on, the
POWER indicator light illuminates. It is not a power switch. This button also serves as a SYSTEM RESET
button. Pressing the button will reset the system from boot up.
Rear Panel Connections and Controls (Left to Right):
1) Power Supply Input: 12VDC, 3.0 Amp power supply on a 5.5mm OD x 2.5mm ID connector.
2) Whiteboard RJ-45: Power and data transmitted to and from the Whiteboard via Cat. 5e cabling.
3) Ethernet on RJ-45: Ethernet port is reserved for future use and not active at this time.
4) Settings: The Squiggle Quick-Connect has a 5-position dip switch for setting HD or SD resolution, refresh
rate, test bars and switches available for future settings.
5) Video Outputs: Three video outputs; DVI-D, YPbPr HD and CVBS (composite), are available on the
Squiggle Quick-Connect Interface.
•
The DVI-D and YPbPr outputs are simultaneous outputs and are at a resolution of 720p/59.94 or
720p/50 which allows the Squiggle Board to be connected to a variety of video devices such as Vaddio
switchers/mixers, videoconferencing codecs, monitors and other third-party video devices.
•
The SD Video can be chosen instead of the HD DVI-D and YPbPr outputs and output SD resolutions of
480i/NTSC and 576i/PAL.
NOTE: If the SD composite video output is chosen instead of the HD outputs, a dip switch setting is
changed to allow the SD output to be active. The HD outputs are not active when the SD video is
chosen with the dip switch. Conversely, the SD video out is not active when the HD video is chosen.
Optional Accessories for Squiggle Board:
①
②
③ ④
②
① ⑤
Colored Digital Sleeves
(998-5440-030)
Whiteboard Cleaner
(998-5440-020)
Standard Whiteboard
Eraser
(998-5440-010)
Replacement Bullet
Tip Markers
(998-5440-040)