Back of the Camera – RoboSHOT 12 USB
n
12 VDC 3.0 A
– EIAJ-04 jack. Connect only the power supply shipped with the camera or approved
replacement 12 VDC, 3A power supply. This connection is not needed if you connect to the network
using a mid-span PoE+ power injector.
n
Network PoE+
– RJ-45 connector. Connect to the network for network access for IP streaming and
camera control via web interface or Telnet. Optionally connect to the network using a mid-span PoE+
power injector for power, streaming, and control.
n
USB 3.0
– USB type B connector. Connect to a computer for use with soft conferencing applications.
Provides uncompressed USB 3.0 stream.
n
HDMI video select switch
– Select the appropriate HDMI video output resolution for the near-end
video display. USB streaming resolution is auto-negotiated; IP streaming resolution is set in the
administrative web interface.
n
Camera Settings
– DIP switches to set camera behaviors such as IR frequency, image flip (camera is
invertible), normal or Super-Wide mode, and baud rate. See
n
HDMI
– HDMI video output connector. Connect to the near-end video display.
n
RS-232
– RJ-45 connector. Optionally connect to a controller to manage the camera using a modified
VISCA protocol.
Note
A label on the bottom of the camera lists the rotary and DIP switch settings.
6
Complete Manual for RoboSHOT USB Enterprise-Class PTZ Conferencing Cameras
