camera tilt
Moves the camera vertically.
Synopsis
camera tilt{ up [<speed>] | down [<speed>] | stop | get | set <position> [<speed>] }
Options
up
Moves the camera up.
down
Moves the camera down.
speed
<1 - 20>
Optional: Specifies the tilt speed as an integer
(1 to 20). Default speed is 10.
stop
Stops the camera's vertical movement.
set
<position>
Sets the camera's absolute tilt position in
degrees, as a floating point value between
approximately -30.00 and 90.00. This is the
minimum range; individual cameras may have
an additional degree or two of travel before they
reach their physical limits.
get
Returns the camera's absolute tilt position in
degrees, as a floating point value between
approximately -30.00 (down) and 90.00 (up).
Note that the range is roughly 30.00 to -90.00 if
Image Flip is selected.
Examples
>
camera tilt up
OK
>
Tilts the camera up at the default speed.
>
camera tilt down 20
OK
>
Tilts the camera down at a speed of 20.
>
camera tilt 15.25 12
OK
>
Tilts the camera to position 15.25 at a speed of 12.
58
Complete Manual for RoboSHOT USB Enterprise-Class PTZ Conferencing Cameras