Adjusting Tri-Synchronous Motion Speed
C
AMERA PAGE
The Tri-Synchronous Motion algorithm calculates the pan, tilt and zoom speeds needed for the camera to
move from one preset to the next so that all three movements begin together and arrive at the same time.
You may need to experiment to find the best Tri-Sync speed setting. Here is a simple method:
1. Store a preset, checking Save with Tri-Sync and setting the speed slider about a third of the way along
the scale.
2. Move the camera to a different pan, tilt, and zoom position, and save this position as another preset.
Again, check Save with Tri-Sync; but set the speed slider to about the halfway point.
3. Move the camera from one preset to the other to evaluate which movement is closer to the speed you
want. Use the Tri-Sync speed associated with that preset, or adjust it as needed.
4. Store all the presets you will need.
5. Switch among the presets to determine whether any of them should use different Tri-Sync speeds.
6. Adjust the speeds as needed.
58
Complete Manual for RoboSHOT HDBT High-Performance PTZ Cameras
