VADDIO RoboSHOT 12, Инструкция по установке и эксплуатации

Страница: 13 / 41

RoboSHOT HD Cameras for MATRIX PRO
RoboSHOT HD Cameras for MATRIX PRO - Document Number 342-1027 Rev A Page 13 of 41
C
ONTROLLING THE
C
AMERA
IR Remote Commander
The following functions are accessible with the Vaddio IR remote:

Camera Power On/Off (Toggle on/off same button)

Back Light Compensation (Toggle on/off same button)

Data Screen: Toggle on/off the OSD for the RoboSHOT’s IP/MAC Address

Camera Select (the remote can operate 3 cameras (with 3-IR Freq.)

Pan/Tilt and Home controls with Reverse and Std. Pan direction

Pan/Tilt Reset

Auto Focus (Toggle on/off same button)

Zoom In/Out controls Wide & Telephoto

Fast speed controls (W & T)

Slow speed controls (W & T)

Manual Focus On/Off control (Toggle on/off same button)

Near (-) adjustment

Far (+) adjustment

Six (6) pan/tilt/zoom positioning presets (1 through 6)

Preset Set (store)

Preset Reset (clear)

Red LED that indicates IR Transmission and battery level
The IR Remote operational characteristics are as follows:

Preset Activation: IR Remote is limited to executing Presets 1 through 6

Tri-Sync Speed on Preset : If a global Tri-Sync speed is stored in the preset by the user/admin, then that
speed is used. If no Tri-Sync speed is assigned, then a default (medium) speed will be used.

Preset Store: IR Remote is limited to positional (PTZ) type presets. To set a preset, position the camera,
hold down the Preset Button and touch the one of the preset numbered buttons 1 through 6.
Telnet Control Examples
The RoboSHOT cameras have * Telnet capability on board, however please use the Telnet
command list within the MATRIX PRO to control the camera. Nevertheless, the following
* Telnet commands are available through the Camera’s Ethernet Port.

Camera Home

Camera Pan (left, right and speed - real-time operation)

Camera Tilt (up, down and speed - real-time operation)

Camera Zoom (zoom in/out/stop and speed - real-time operation)

Camera Store Preset (Gets or Sets 12 presets with global relative PTZ [Tri-Sync] speed control to destination)

Camera Image (Gets or sets current image control values, sets in 1 of 3 CCU presets, AWB or manual
w/Red and Blue gain, BLC on/off, Auto Iris or manual with Iris value and Gain, Detail and Chroma)

Camera Standby (Gets or sets standby power mode - camera has to us less power in this mode)

Exit (ends Telnet session)

Help (displays CLISH syntax)

History (command history)

Network Ping (send ICMP ECHO_REQUEST to network hosts)

Network Settings (Gets MAC address, IP address, Subnet Mask, Gateway and NTP server address)

System Factory Reset

System Reboot

Version (system version information)
* Please see the full and actual Telnet command list at the end of this manual for details.
Vaddio
IR Remote
Commander