RoboSHOT HD Cameras for MATRIX PRO
RoboSHOT HD Cameras for MATRIX PRO - Document Number 342-1027 Rev A
Page 11 of 41
Diagram: Basic Wiring Configuration with MATRIX PRO
RoboSHOT 12 cameras with AV Bridge Matrix PRO showing basic connectivity with color coded RJ-45 jacks.
Obviously, there’s a whole bunch more stuff going on here with the MATRIX PRO, that’s why we suggested earlier
that using the MATRIX PRO manual in conjunction with this manual for the RoboSHOT’s is your best bet.
P
RE
-I
NSTALLATION
Choose camera mounting location, paying close attention to camera viewing angles, lighting conditions, possible
line of site obstructions, and checking for in-wall obstructions where the camera is to be mounted. Always pick
a mounting location that will optimize the performance of the camera. Please locate the camera to enable easy
positioning of the camera body with the ability to point down and away from the ceiling and a pile of fluorescent
lighting cells.
Cameras generally don’t like to be swamped with fluorescent light and nobody sits or stands on
the ceiling anyway..
.as a general rule.
For Power/Video and RS-232 signals, use standard Cat-5/5e/6 cable (568B termination and real RJ-45
connectors) from the EZ-POWER VIDEO and RS-232 ports on the back of the RoboSHOT to the MATRIX PRO.
These jacks are
color coded
for ease of connection.
HDMI Out to Monitor
Simulated
Video Feed
Key:
RS-232 Cat-5
Blue Line
Bidirectional RS-232 Control
Signals
Orange Line
EZ-POWER VIDEO Cat-5
Power to Camera and differential
HD Video from the Camera
Cat-5 Cable
Distance for RoboSHOT video,
power and control is up to 100’
RS-232
Cat-5
RS-232 Cat-5
EZ-POWER
VIDEO Cat-5
EZ-POWER
VIDEO Cat-5
RoboSHOT 12
HD PTZ Cameras
AV Bridge MATRIX PRO
Rear Panel Connections
HD Video Monitor