camera tilt
Moves the camera vertically.
RoboSHOT AVBMP only: Specify
camera1
,
camera2
, or
camera3
.
Synopsis
camera tilt{ up [<speed>] | down [<speed>] | stop | get | set}
Options
up
Moves the camera up.
down
Moves the camera down.
speed
<1 - 20>
Optional: Specifies the tilt speed as an integer
(1 to 20). Default speed is 10.
stop
Stops the camera's vertical movement.
get
Returns the camera's current tilt position.
set
<position>
Sets the camera's absolute tilt position in
degrees, as a floating point value between
approximately -30.00 and 90.00. This is the
minimum range; individual cameras may have
an additional degree or two of travel before they
reach their physical limits. If the value is out of
range, the camera returns an error message
and no motion occurs.
Examples
>
camera tilt up
OK
>
Tilts the camera up at the default speed.
>
camera tilt down 20
OK
>
Tilts the camera down using a speed of 20.
>
camera tilt stop
OK
>
Stops the camera's vertical motion.
78
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
