Page 6 of 11
Vaddio Loader Update Instructions
Requirements:
-
USB to Serial Adapter.
-
Vaddio EZCamera Control Adapter (part # 998-1001-232).
-
Cat-5 or better cable to connect the distance between PC and EasyUSB Mixer/Amp interface
-
A PC with the following downloaded onto it:
o
The latest version of the Vaddio Loader program (available at
o
The ‘Serial’ version (.ldr) firmware file for your MicPOD, located on the microphone’s
product page at
Step-By-Step Process:
1. Connect the PC and the EasyUSB Mixer/Amp:
-
Plug the USB to Serial Adapter into a USB port on the PC.
-
Connect the Vaddio EZCamera Control Adapter to the USB to Serial Adapter via their 9-
pin connectors.
-
Connect your Cat-5 or better cable to the RJ-45 port on the EZCamera Control Adapter.
-
Connect the other end of your Cat-5 or better cable to the RS-232 port on the EasyUSB
Mixer/Amp.
Example connection diagram
– your cable colors may be less fun.
2. Open Vaddio Loader on the PC and choose the COM port you have connected to the EasyUSB
Mixer/Amp if prompted (if not prompted, you can check or change which is selected by going to
File -> Setup COM#).
EZCamera
control adapter
USB to serial
Cat-5
