manualshive.com logo in svg

VADDIO EasyMic MicPOD Series, Руководство по обновлению и примечания к выпуску

Поделиться
Скачать
VADDIO EasyMic MicPOD Series Скачать руководство пользователя страница 11

 

 

                  

 

Vaddio is a brand of Milestone AV Technologies · 

www.vaddio.com

 · Phone 800.572.2011 / +1.763.971.4400 · Fax +1.763.971.4464 · 

Email 

[email protected]

 

Visit us at support.vaddio.com for firmware updates, specifications, drawings, manuals, and technical support information. Vaddio is a 
trademark or registered trademark of Milestone AV Technologies. All other brand names or marks are used for identification purposes and are 
trademarks of their respective owners. In British Columbia, Milestone AV Technologies ULC carries on business as MAVT Milestone AV 
Technologies ULC. 
©2018 Milestone AV Technologies 
 

Page 11 of 11         

 

15. 

Do not disconnect any cabling until Vaddio Loader indicates a successful firmware load

. 

In about 3-5 minutes your firmware update should be done.  

 

 

16. If you have more than one microphone, return to step 11 and repeat the process for the other 

MicPOD unit. 

17. Remove power from the EasyUSB Mixer/Amp. 
18. Reconnect all EasyMic MicPODs in their original configurations. 
19. Move DIP switch 8 back into the 

‘down’ position. 

20. Reapply power to the EasyUSB Mixer/Amp and take a moment to savor the little victories in life. 

 
 
 

Additional Information: 

Thank you for your continued support of Vaddio products. Please contact Vaddio with any questions at 763-971-
4400 or through our website.  

Содержание EasyMic MicPOD Series












Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды