Using Dante Devices with the EasyIP Mixer
The EasyIP Mixer is compatible with Dante audio products. These products connect to the EasyIP Mixer
over the network.
To work with Dante devices, you will need to download and install the free Dante Controller application
from Audinate Pty. Ltd.:
www.audinate.com/products/software/dante-controller
Things to know about Dante Controller:
n
Dante Controller does not work over Wi-Fi or across subnets. Your computer must be on the same
subnet as the Dante devices you need to work with.
n
Device names and IP addresses shown in Dante Controller do not match the corresponding information
shown in Vaddio devices' web interfaces.
n
Dante Controller allows you to rename devices, so you can make their identifying labels match what's
displayed in the Vaddio web interface.
Audinate provides information, training, and documentation for Dante technology on their website.
Installing the Wall Mount
The camera is shipped with a wall mount. Other mounting options are available as well. Contact us if you
don’t have the camera mount you need.
You can install the camera wall mount to a 2-gang wall box or directly to the drywall.
n
If you mount it to drywall, use the wall anchors provided with the wall mount.
n
If you mount it to a wall box, use the cover plate screws supplied with the wall box.
If you install the camera wall mount to drywall, use the wall anchors provided with the mount.
Your camera mount may look somewhat different.
About Ceiling-Mounted Cameras
If you use an inverted mount, set the camera's Image Flip mode ON for inverted operation. This orients the
video image correctly and sets the tilt motors to respond appropriately to tilt up and down commands from
the remote, web interface, and connected control devices. This control is available to the administrator on
the web interface's System page. See
Inverting the Image for Ceiling-Mounted Cameras
13
Installation Guide for EasyIP Systems
