ClearVIEW HD-USB Conferencing Camera
ClearVIEW HD-USB PTZ Conferencing Camera Document Number 342-0437 Rev. B
Page 6 of 32
Connectors and Functions (continued)
5) YPbPr
Output:
Component HD video is fed through the DE-15 connector (HD-15 for the shell sized challenged). YPbPr and
Composite signals are simultaneous. Note: This is an HD camera and the SD signals are down converted and
are really not the sweet spot of this camera. This is a courtesy feature only.
6) Composite Video (CVBS) Output:
The CVBS output feeds out SD video signals and is configurable with the dip switches to choose between
480i/NTSC or 576i/PAL in 4:3 formats. Squeeze and letterbox modes are also available (see dip switches).
7) EZ Power/Video Port:
This RJ-45 connector is only used with the Quick-Connect SR Interface and the Quick-Connect DVI-D/HDMI SR
Interface to supply power and return HSDS (high speed differential signaling) video from the camera.
8) 5 VDC Output:
The 5 VDC output is on an EIAJ-03 connector was added to supply power to the active Extreme USB Extender
transmitter side. The receiver side is powered by the computer’s USB port or powered USB Hub.
9) USB 2.0 Connector:
The USB 2.0 is on a type-B Female and attaches to a PC running a soft-client video conferencing system or
video capture software that uses UVC (USB Video Class) standard drivers. No other drivers are required to plug
the HD-USB into a computer and have it work. The UVC drivers will auto negotiate the top resolution that the PC
and HD-USB Camera can accomplish together and auto implement it, and bob’s your uncle.
10) Settings Rotary Encoder:
The settings encoder is provided essentially for future use. The only position that is currently assigned and used
is position “C”. This position allows the user to reset the camera back to factory defaults when the camera is
power cycled in the “C” position.
11) Ethernet 10/100 Port (H.264 Streaming Active with Software Release 2.0):
The network port has green and yellow LEDs that indicate ready and usage states. The port allows for access to
the internal web pages for camera set-up and control. The network port will stream (unicast) H.264/MPEG4/AVC
video (from CIF up to and including 1080p/30) in Release 2.0.
12) RS-232 Port:
The RS-232 Port allows external control systems to engage a rudimentary API. Basic functions include pan, tilt
zoom, on/off etc. The functions on the Vaddio IR Remote Commander are mirrored in the API. Most control is
expected to come from the internal web page via Ethernet, Telnet or over USB 2.0.
13) Permanent USB Resource Slot Card:
The lower row of connectors and the brains of the HD-USB Camera are located on this permanent slot card. The
card is not removable and is not compatible with any other Vaddio camera. Please do not try to remove this card
at any time.
F
IRST
T
IME
S
ET
-
UP WITH THE
C
LEAR
VIEW
HD-USB
PTZ
C
AMERA
The ClearVIEW HD-USB PTZ Camera was designed to be exceptionally
easy to use and operate. There is documentation at the back of the
manual for pin-outs. These pin-outs are also available, along with
application TechNotes, from the Vaddio website
www.vaddio.com
.
