AV Bridge
Vaddio AV Bridge - Document Number 342-0518 Rev A Page 9 of 28
System Configuration and Programming
Front Panel Menu
The front panel menu system allows the user to configure the AV Bridge for intended operations. The menu tree
is depicted below:
> Start Page: Initializing and Audio Ladder Appear
> Main Menu
> Audio Inputs
>
Balanced
(Low
Z)
> Unbalanced (High Z)
> Video Inputs
> Auto
>
HD
YPbPr
>
HD
RGBHV
> HDMI
>SD
>
Streaming
>
USB
Streaming
>FUTURE: H.264 & AAC Network Streaming - Release 2.0
>Network Configuration
>Host Name
> Network Settings
>
Mac
Address:
>
IP
Address:
>
Subnet
Mask:
>
IP
Gateway:
>Type:
DHCP
>
Versions
>
DB
(Database)
> MW (Middleware - software)
> FPGA (FPGA code)
> PIC (Microprocessor code)
Selecting Audio & Video Input Sources
Video Input Selection
: This allows the user to select between Auto-Detection, HDMI, HD, or SD video inputs.
These selections correspond to the connectors on the back panel of the AV Bridge. The HD connector (DE-15)
will support signal formats of up to 1080p/60 on either YPbPr or RGBHV inputs. The HDMI connector only
accepts HD signals only, up to 1080p/60. The SD signals are 480i/NTSC and 576i/PAL. The video inputs can be
switched during a USB streaming session.
Audio Input Selection:
The user has the ability to select between the balanced stereo audio input and an unbalanced stereo input.
These are selectable during a USB session.
