AV Bridge
Vaddio AV Bridge - Document Number 342-0518 Rev A Page 10 of 28
Network Settings:
The Network settings is a “read only” message representing the current IP addresses defined for the AV Bridge
by the webpages. Properties displayed include:
Mac
Address:
IP
Address:
Subnet
Mask:
IP
Gateway:
Net Type: DHCP
Hotkey Buttons and Indicators
A number of common user controls have been included on the front panel for quick access by the user during a
streaming session. Dedicated controls and indicators include:
Video Mute
:
Stops the video input source from being sent to the Host PC and replaces with a color bar image. The Video
Mute button will be backlit Red when in mute state.
Audio Mute:
This button mutes the input audio source being sent to the Host PC. The Audio Mute button
will be backlit in red when in mute state.
Audio Level:
A rotary control with 10 steps (but goes to 11) allows the user to adjust the audio input level
being sent to the Host PC. A visual volume level is presented on the LCD to provide feedback of the current
audio level. (Note: This level is not the same as the PC’s record channel volume controls.) The audio
ladder will show a relative volume level as it is adjusted however, after it shows that level for a few seconds it
will act as a VU meter (future software release). The levels shown now are too low and the meter is too
insensitive to give good information as a VU meter. This is a known issue and will be addressed in Software
Version 2.0.
Video
Input
LED:
A visual LED indicator represents the current video source being sent to the Host PC. The selected source
will be indicated in Blue.
Audio Input LED:
A visual indication of current audio input source being sent to the Host PC. Selected
source will be blue.
Web Pages Tour
Screen Shot: Login
The AV Bridge web server is intended as an administrator’s management tool and requires authentication for
access. The user account name is ‘Admin and’ has a default password of ‘password’ which can be modified after
initial login to the system.
➲
