AV Bridge
Vaddio AV Bridge - Document Number 342-0518 Rev A Page 17 of 28
STEP
3:
Start firmware update process. A panel will pop-up providing information on the progress of the firmware
update. At the end of the process, the AV Bridge will reboot.
Low
Level
Firmware
updates
with
Vaddio
Loader
The Vaddio Loader is used to update low-level firmware associated with the AV Bridge. This includes component
images for the FPGA and PIC processor. The update process requires a RS-232 connection between the PC and
the AV Bridge.
Updating FPGA Image: <TBA>
Updating PIC Image: <TBA>
Updating PIC Image: <TBA>
Factory Default
The AV Bridge can be restored to factory defaults with the DIP Switches on the rear of the device. Process for
defaulting AV Bridge to factory settings is:
Step 1:
Place all dip switches to the off position (down).
Warning: Current Settings will be erased.
Step 2:
Press Reset on the front panel of the AV Bridge. Device will reboot to factory settings.
