VADA VFB-HM80, Руководство по установке

Страница: 11 / 29

21 20
VADA FLOW BOSS HORIZONTAL MULTISTAGE PUMP VFB-HM80 INSTALLATION MANUAL
INSTALLATION
4. Check the set up so far. Ensure that the
VFB-APC is braced or fixed so minimal
movement occurs once in operation. If the
distance between the pump and highest
outlet exceeds 15m, adjust the cut-in
pressure on the VFB-APC.
25mm Y Strainer
25mm Barrel union
Solid base
10
0m
m
Flow
Isolation
valve
PART 6: FIT A VADA FLOW
BOSS MECHANICAL WATER
SWITCHING UNIT 25MM
Follow these steps if you are installing a
Vada Flow Boss Mechanical Switch for a tank/
mains system.
1. Grab the rubber washer supplied and
place it on top of the Auto Pressure Control
(VFB-APC) outlet.
2. Hold the Mechanical Switching Unit
(VFB-MSU25) over the outlet and connect
the loose nut. Do not overtighten. The
rubber washer will lock this in place.
3. Connect the mains water pipe to the
VFB-MSU25 outlet labelled “mains in”.
4. Connect the house water pipe to the
VFB-MSU25 outlet labelled “to house”.
5. For easy maintenance down the track,
install an isolation valve into both the mains
and house water line.
Power on
Pump on
Error
Restart
AUTO PRESSURE CONTROL
FLOW BOSS
240-50Hz
Max 1.5kW
Max 1MPa
8A
IP65
2. Position the Auto Pressure Control
(VFB-APC) between the pump and the first
outlet.
Note: If you are installing the VFB-APC directly
onto the Horizontal Multistage Pump, use a
25mm barrel union. If you are installing the
VFB-APC between the pump and first outlet,
use pipework with a minimum internal diameter
of 25mm.
Note: Do not install an outlet between the
pump and VFB-APC.
Note: the pipe must have an internal diameter
no smaller than 25mm until the first tee branch.
3. Ensure the VFB-APC is installed with the
arrows pointing up.
Solid base level
Power on
Pump on
Error
Restart
AUTO PRESSURE CONTROL
FLOW BOSS
240-50Hz
Max 1.5kW
Max 1MPa
8A
IP65
Mains water in
Power on
Pump on
Error
Restart
AUTO PRESSURE CONTROL
FLOW BOSS
240-50Hz
Max 1.5kW
Max 1MPa
8A
IP65
Mains water in
To house
Power on
Pump on
Error
Restart
AUTO PRESSURE CONTROL
FLOW BOSS
240-50Hz
Max 1.5kW
Max 1MPa
8A
IP65
Power on
Pump on
Error
Restart
AUTO PRESSURE CONTROL
FLOW BOSS
240-50Hz
Max 1.5kW
Max 1MPa
8A
IP65
To house Mains water in
Power on
Pump on
Error
Restart
AUTO PRESSURE CONTROL
FLOW BOSS
240-50Hz
Max 1.5kW
Max 1MPa
8A
IP65