page 2 of 17
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 999039 / 16/12/2009
After sales service: Contact your local dealer or call +49 9342 808-193.
Dear customer,
Your VACUUBRAND vacuum gauge shall support you at your work for a long time without any trouble and
with full load output. Thanks to our large practical experience we attained much information how you could
add to an efficient application and to personal safety. Please read these instructions for use prior to the
initial start-up of your controller.
VACUUBRAND vacuum gauges are the result of many years of experience in construction and practical
operation of these vacuum gauges combined with the latest results in material and manufacturing technology.
Our quality maxim is the ”zero fault principle”:
Every delivered vacuum gauge is tested extensively including an endurance run. Due to this endurance
run, also faults, which occur rarely, are reported an can be corrected. Every single vacuum gauge is tested
on achievement of the specification after the endurance run.
Every VACUUBRAND controller leaving our factory achieves the specification. We feel obliged to
this high quality standard.
We are aware that the controller should not draw a part of the real work and we hope to contribute with our
products to an effective and troublefree realisation of your work.
Yours
VACUUBRAND GMBH + CO KG
