page 13 of 20
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. 11/08/2015 // 999281
➨
Lay down the BVC as shown in the figure.
➨
Unscrew screws at the base plate.
➨
Slide the base plate to the side.
➨
Remove earth cables.
➨
Remove hose from pressure sensor using tweezers.
➨
Remove sensor hose and dismantled into individual com-
ponents.
Connect person to ground before coming in contact with electronic
parts.
IMPORTANT
