background image

1. Release the Dust Cup Buckle

2. The cover of Dust Cup will open 

    automatically

3. Clean the inside of Dust Cup with 

    the provided cleaning tool or scrub 

    clean with dishcloth.

4. Buckle the Cover

Emptying the clear bin

MAX

•Do not carry out any maintenance or repair work other than that shown and described in this 

Operating Manual.

• Only use parts recommended by OPODEE.

• Store the machine indoors. Do not use or store it below 37.4°F (3°C).

• Ensure the machine is at room temperature before operating.

• Clean the machine only with a dry cloth.

• Do not use any lubricants, cleaning agents, polishes or air fresheners on any part of the machine.

• Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.

• Ensure the machine is disconnected from the charger before emptying the clear bin.

• To make emptying the clear bin easier, it is advisable to remove the tube and

 floor tool.

• To minimize dust/allergen contact when emptying, encase the clear bin tightly in a

 plastic bag and empty.

Charge the Machine

Looking after your machine

Plug the adapter into the a wall outlet and plug the DC jack into the DC socket of the Battery

You can remove the battery to 

charge from the macine.

Charging time : 4-5 Hours

The LED is flashing one by one,when charging.

The four lights will light on, when fully charged.

1

2

3

4

Click

Содержание VB25W










Отзывы: