1. Unlock the Buckle
2. Pull out the block.
3. Pull out the rolling brush
4. Clean the rolling brush
5. Reinstall the rolling brush by inserting
the fixed protruding end first and then
clicking into place.
Direct Drive Cleanerhead: Cleaning
obstructions or replace brush
Troubleshooting
Suction gets weak
1. Empty the dirt cup
.
2. Clean the HEPA filter
.
3. Check if the dust cup is installed correctly
.
Roller brush stops spinning
or has strange noise
1. Check if the brush (especially the bearing part) is stuck by hair
.
2. Check if the filter cup is installed correctly in the right place
.
3. Detach the tube, use the handheld part only. If not work,
contact the seller for help
.
Battery doesn’t charge
1. Check if the charger & charging base is connected correctly
.
2. If there is no light on when charging, contact the seller for help
.
1
6
6. Reinstall the block and lock the Buckle
4
3
2
5
Technical Specification
Battery
Charging time
Motor Power
Power Suction
Battery Power
Charging Voltage
Working time
22.2V / 2200 mAh Li-ion
4-5 hours
26.5V / 0.5A
250W
20Kpa
48.84W
35min (low speed), 20min (high speed)
