SPECIAL SITUATIONS - NEW & EXISTING HOMES (CONTINUED)
Step 5
Center VacPan under
cabinet so as to
avoid standards and
cabinet supports. Use
a 1x4 and a 2x4 under pipe to
get correct height. Dry fit horizontal pipe
into sweep 90 that comes up under cabinet. We recom-
mend having cabinet people put a false bottom in this cabinet. Pipe
opening is
not
centered to opening in mopboard. Measure 4" to right side of cen-
ter and 2-1/2" to left of center, 6-1/2" width x 1-3/4" height over all. If installation of
VacPan is only possible from front of mopboard, cut opening 6-1/2" x 3-1/2" and use
oversized trim plate.
PAGE 9
How to Install the System (Continued)
