![background image](http://html1.mh-extra.com/html/vacron/16ch-nvr/16ch-nvr_user-manual_3124568018.webp)
14
7)
Point the cursor and click the IP address under new IP that needs to be
changed. On-screen keyboard will popup in the screen. Click again to
close on-screen keyboard.
8)
Make sure all NEW IP addresses are correct. Mark the cameras that will
connect to the NVR. Click [SELECT ALL IPCAM] on top-left corner to
apply to all cameras. (Note: the maximum number of cameras supported
is 16 units). Click [APPLY] when ready to connect.
Caution! IP addresses of NVR and cameras cannot be the same. Default
IP address of NVR is 192.168.1.69.