BE CAUTIOUS!
Do not damage the machine .
No oil is in a new machine. Pump will be damaged if it is running without oil.
Before starting the machine, please ensure the oil level in the pump is past
the fill line. Filling the oil from other positions of pump may damage the
pump. Ensure through the oil port to fill the oil into the pump. It will be harmful
to human health with long-term effects of inhaling the gas (that might be
containing residual oil) which is expelling from pump during the operation.
Please make sure that using the machine is in a good condition of ventilation.
• After each day’s use or when the machine is dirty, remove the seal bar and wipe
down the chamber, lid and exterior with a damp cloth and mild soap to remove food
particles and other debris.
• The seal bar should be wiped clean with a damp cloth only.
• Never use an acetone, acetone-based or abrasive cleaner on the lid or other plastic
parts. Parts can become discolored, scratched, or even appear burned if these
materials are used.
• The stainless steel housing should be cleaned and cared for by using a traditional
stainless steel cleaning material.
• Inspect the power cord for tears, frays, or other damage. Do not use machine if the
power cord is damaged.
Routine Cleaning
Filling Oil And Draining Oil
Filling Oil
Draining Oil
1. Use the screw driver to open the oil window #1
2. Open the screw cap of oil filling port
3. Fill the oil to pump via the oil bottle until the oil in pump stays at 1/2~3/4
position(between MIN and MAX that displays from oil indicator)
4. Screw tightly the cap and reinstall the cover of oil window#1
1. Use the screw driver to open the oil window #2.
2. Prepare a container and put it under the oil draining port directly
3. Twist off the screw cap, then the oil starts draining.
4. After all the oil is drained, screw tight the cap and reinstall the cover of oil window #2.
8.