3.
1 . Temperature Display -
Shows the current water temperature.
2 . Set Temperature Display -
Shows the desired water temperature.
3 . Time Display
- Shows remaining heating/holding time.
4 . Water Heating Indicator Light
5 . Water Circulating Indicator Light
6 . Temp/Time Button -
Press to adjust temperature or time.
7 . Increase Button -
Press to increase temperature or time.
8 . Decrease Button -
Press to decrease temperature or time.
9 . °C/°F Button -
Press to toggle between Celsius and Fahrenheit display.
10 . Start Button -
Press to begin heating and circulating the water.
11 . Stop Button -
Press to stop operation.
1
7
9
10
3
2
11
6
5
4
8
OPERATING INSTRUCTIONS
CONTROL PANEL
1. Select a container for water bath. A water container with a 6" depth is required to use
with this equipment. This unit is designed to heat and circulate up to 8 gallons of water.
2. Attach the circulator head to the container via the adjustable clamp.
Make sure the circulator head is fixed firmly to the container.
3. Fill the container with water until it reaches a level between the MAX and MIN fill lines
on the circulator head.
4. Plug the machine into a grounded electrical outlet matching the nameplate related
voltage. The LCD screen will light up once the machine is plugged in.
5. Adjust and set controls (see below).
