X
5
OPT
01 115
VAC / Encoder Interface Option Board
vacon
3
Email: [email protected] • Fax 717-264-3115
Installing the
X5
OPT
01 115
VAC /
Encoder Interface Option Board
Introduction
The X5OPT01 provides the option of controlling X5 AC drives from 115 VAC control signals, or to connect a shaft-
mounted encoder to the drive to improve speed regulation. A maximum of five channels of 115 VAC control is
available for use in selecting direction, preset speeds, or other drive functions.
With this option, an encoder with a nominal rating of up to 2048 pulses per revolution can be connected to the X5
unit to improve speed load regulation of the drive. Overall encoder frequency at maximum process speed must be
limited to 100kHz.
This option also provides two additional control relays, each rated for 115 VAC, 1 amp, or for 230 VAC, 0.5 amp.
Applicable Documents
This manual is supplied as a supplement to the X5 AC Drive User’s Manual (DPD 00089, previously Form 1434).
Option Kit Contents
The option kit includes the following materials:
Part Number
Description
25100079C
115 VAC / Encoder Option Board
32100391
Flexible cable assembly
