Vacon 500X, Руководство пользователя

Страница: 56 / 124

Tel. +358 (0)201 2121 • Fax +358 (0)201 212205
55
z
vacon using macro mode and getting a quick start
6
6.3 Macro Mode Applications and Included Parameters
The tables below list the different applications and the Level 1 parameters included in the macro for that
application. The Factory Application macro is the core package (listed in Table 1); the other macros include
the Factory Application macro parameters as well as the ones listed in their respective tables (Tables 2, 3,
4, 5, and 6). The macro mode applications are as follows:
Factory Application (Table 1)
Fan Application (Table 2)
Fan with PI Application (Table 3)
Pump Application (Table 4)
Pump with PI Application (Table 5)
Vector Application (Table 6)
810 Language Default: English
Range: 1-65535
Level 2, Macro
This parameter configures the language in which text strings will be displayed.
The following data values may be assigned to this parameter:
Parameter Value
English
Spanish
Para. # Parameter Name Default See Page
001 Model Number Read-only 61
102 Output Freq Read-only 62
103 Output Voltage Read-only 62
104 Output Current Read-only 62
105 Drive Load Read-only 63
106 Load Torque Read-only 63
107 Drive Temp Read-only 63
111 DC Bus Voltage Read-only 63
201 Input Mode Local Only 66
202 Rev Enable Forward 66
301 Min Frequency 0.0 Hz 69
302 Max Frequency 60.0 Hz 69
303 Preset Freq 1 5.0 Hz 69
402 Accel Time 1 5.0 sec 71
403 Decel Time 1 5.0 sec 72
502 Voltage Boost 0.0% 75
610 Timed OL Select Std Ind 60s 80
700 Vmet Config Freq Out 81
705 Relay 1 Select Drv Fault 83
706 Relay 2 Select Drive Run 83
Table 1: Factory Application Macro