manualshive.com logo in svg

Vacon 500X, Руководство пользователя

Инструкция по эксплуатации Joovy 500X - ваш надежный гид, обеспечивающий безопасное и комфортное использование продукта. Вы можете бесплатно скачать руководство по эксплуатации на manualshive.com. Получите доступ к рекомендациям по настройке и уходу за продуктом, чтобы он служил вам долгие годы.

Поделиться
Скачать
background image

Tel. +358 (0)201 2121 • Fax +358 (0)201 212205

53 

z

 vacon     using macro mode and getting a quick start

6

6.    USING MACRO MODE AND GETTING A QUICK START

A special Macro programming mode is available with the Vacon 500X series of AC drives. The Macro
programming mode allows you to customize quickly the most common parameters for your application in
the Level 1 group. Macro mode provides special parameters for activating modes of operation by macros,
program sequencer, or serial communications. 

Parameters important to the drive’s operation are also included in Macro mode. Although these
parameters are also available with standard programming, the Macro mode allows you to easily configure
the drive with essential parameters. 

Macros configure what advanced functions will be active in the drive. A macro can also change the default
or visibility of a parameter within the programming levels. Parameter 490 (Appl Macro) configures what
macro will be active in the drive. Parameter 491 (Seq Appl) configures the visibility of sequencer
parameters and the time base of the sequencer.  Parameter 492 (SIO Visible) configures whether or not SIO
parameters are visible. (See 

page 53

.)

6.1  Entering Macro Mode

To enter the Macro mode, press and hold the PROGram key for more than three seconds. The drive then
enters Macro mode and displays “Hold PROG for Macro Mode.” Following is a list of the different macros
available and their features. A description of parameters used in Macro mode begins on page 53. 

Factory

The Factory macro provides a simple way to restore the factory default parameter  listings.

Fan

The Fan macro provides a basic set-up for Fan applications. Parameters such as the V/Hz curve and 
terminal strip operation are available in Level 1 programming.

Fan w/ PI

The Fan w/ PI macro allows for a simple set-up for Fan applications requiring process control. 
Parameters such as the V/Hz curve, terminal strip operation, and PI  configuration parameters are 
available in Level 1 programming.

Pump

The Pump macro provides a basic set-up for Pump applications. Parameters such as  the V/Hz 
curve and terminal strip operation are available in Level 1 programming.

Pump w/ PI

The Pump w/ PI macro allows for a simple set-up for Pump applications requiring process control. 
Parameters such as the V/Hz curve, terminal strip operation, and PI configuration parameters are 
available in Level 1 programming.

Vector

The Vector macro activates the sensorless vector control algorithm. When an operation requires 
low speed and high torque, this macro should be activated.

6.2  Description of Parameters Used in Macro Mode

Parameters 490, 491, and 492 are used only in the Macro mode.  Parameters 509, 510, 511, 801, and 810
are used in both Macro and Level 2 programming.  Vacon 500x parameters are described in “Vacon 500X
Parameters” on page 61 of this manual.

490   Appl Macro

Default: Factory

Range: n/a

Macro

This parameter configures what macro will be active in the drive. A macro will change a default or visibility of 
a parameter.
The following data values may be assigned to this parameter:

Macro

Description

Factory

Provides a simple way to restore factory default parameter listings.

Fan

Provides a basic set-up for Fan applications, including V/Hz curve and terminal 

                                                                  strip operation in Level 1 programming.
Fan w/PI

Provides a simple set-up for Fan applications that require process control. 

                                                                  Parameters such as V/Hz curve, terminal strip operation, and PI 
                                                                  configuration are available in Level 1 programming.
Pump

Provides a basic set-up for Pump applications, including V/Hz curve and 

                                                                  terminal strip operation in Level 1 programming.
Pump w/PI

Provides a simple set-up for Pump applications requiring process control. 

                                                                  Parameters such as V/Hz curve, terminal strip operation, and PI
                                                                  configuration are available in Level 1 programming.
Vector

Activates the sensorless vector control algorithm. When an operation requires low 

                                                                  speed and high torque, this macro should be activated. Note that when you select 
                                                                  Vector mode, the drive automatically runs the Motor RS Measurements 
                                                                  when leaving Program mode.

491   Seq Appl

Default: Disabled

Range: n/a

Macro

Содержание 500X





























































































































Отзывы:

Нет отзывов

Похожие инструкции для 500X

Samson 3296 Mounting And Operating Instructions preview
3296
Бренд: Samson Страницы: 100
Danfoss JS120 Technical Information preview
JS120
Бренд: Danfoss Страницы: 16
Radio Shack Remote Control Owner'S Manual preview
Remote Control
Бренд: Radio Shack Страницы: 3
Datavideo WR-500 Quick Start Manual preview
WR-500
Бренд: Datavideo Страницы: 8
UNICORECOMM UM4B0 User Manual preview
UM4B0
Бренд: UNICORECOMM Страницы: 32
UNICORECOMM UM220-IV M0 Additional Instructions For Installation And Operation preview
UM220-IV M0
Бренд: UNICORECOMM Страницы: 7
UNICORECOMM UM220-INS NF Installation And Operation User Manual preview
UM220-INS NF
Бренд: UNICORECOMM Страницы: 26
UNICORECOMM UM220-INS NF User Manual preview
UM220-INS NF
Бренд: UNICORECOMM Страницы: 25
Dantherm CC 3000 Manual preview
CC 3000
Бренд: Dantherm Страницы: 20
Audioaccess PX-700 Manual preview
PX-700
Бренд: Audioaccess Страницы: 2
Technische Alternative UVR 63H Operation And Installation Manual preview
UVR 63H
Бренд: Technische Alternative Страницы: 68
TechGrow Humi DualPro User Manual preview
Humi DualPro
Бренд: TechGrow Страницы: 34
Advantech ADAM-3017 Startup Manual preview
ADAM-3017
Бренд: Advantech Страницы: 2
Leviton Vizia RF+ VRP15-1LW Installation Instructions preview
Vizia RF+ VRP15-1LW
Бренд: Leviton Страницы: 3
DSC PC5928 Quick Start Manual preview
PC5928
Бренд: DSC Страницы: 16
Samson 3371 Series Mounting And Operating Instructions preview
3371 Series
Бренд: Samson Страницы: 70
Keysight Technologies 11713D Operating And Service Manual preview
11713D
Бренд: Keysight Technologies Страницы: 105
Carel PlantWatch Installation And User Manual preview
PlantWatch
Бренд: Carel Страницы: 48

Бренды по названию

Популярные бренды

Загрузить еще бренды