Vacmaster VZA306P 1101, Руководство оператора

Страница: 10 / 13

10
REMOVING & CLEANING EXHAUST FILTER
1. Verify that the power cord is disconnected from the outlet.
2. Unlock the exhaust filter door by lifting both of the locking tabs upwards and pull the door out
(Fig. 7 & 8).
3. Remove the exhaust filter from the vacuum (Fig. 9).
4. Clean the exhaust filter by gently tapping or brushing off dirt. If necessary, gently rinse the
exhaust filter with clean water. Do not scrub or brush the exhaust filter while wet. Allow the
exhaust filter to air dry for 24 hours before re-installing.
5. For optimal performance a new filter is recommended.
IMPORTANT!
Clean or change the filters regularly for best performance.
ALWAYS USE FILTERS
FOR DRY VACUUMING . If the machine is used without the filters, the motor will burn out and the
warranty will be voided. Always keep spare filters on hand.
NOTICE! The filters included are made of high quality materials designed to stop small dust
particles. The filters should be used for dry pick-up only. A dry filter is necessary to pick up dust.
If the filter is wet, it will clog quickly and be very difficult to clean. Handle the filter carefully when
removing it for cleaning and replacing it. Check the filters for tears or small holes, a small hole
can let dust pass through and out of the filter. Do not use a filter with holes or tears; replace it
immediately.
STORAGE
Before storing your vacuum, the collection tank should be emptied and cleaned. The accessories
should be cleaned and stored so they can be readily available when needed. Store the vacuum
indoors.
1. Store the power cord in place by rotating the cord rewind knob clockwise as shown (Fig. 10).
NOTE: To avoid the power cord from getting stuck, do not retract the cord too fast or in wrong
direction.
2. Put the wands onto the attachment storage (Fig. 11 & 12).
3. The floor nozzle has a storage hook that slides into the slot on the back of the collection tank
(Fig. 12).
REPAIRS
Repairs for this dry vacuum should be performed only by qualified service personnel using only
identical replacement parts.
MAINTENANCE
CAUTION:
Make sure the exhaust filter is dry before use.