Vacmaster VZA306P 1101, Руководство оператора

Страница: 11 / 13

11
TROUBLESHOOTING
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
TROUBLESHOOTING.
PROBLEM POSSIBLE CAUSE SOLUTION
The appliance does not work.
The socket is damaged. Check if the socket has power.
The plug is not plugged into the
wall outlet tightly.
Insert the plug into the power
source and press the on/off switch
button.
Switch in the wrong position. Press the ON button on the power
head.
Motor overheating protection
during use.
Unplug the plug, check whether
the dust bag is full and the
pre-filter or exhaust filter is
locked. Replace the dust bag or
clean up the pre-filter or exhaust
filter, wait for the motor to cool
enough about 50 minutes before
restarting it for use.
Functional fault in the power
cord, switch, or motor.
Have the damaged part checked
by qualified personnel or contact
the after sales helpline.
Dust is escaping from the
motor cover.
The exhaust filter is missing,
damaged or not fully installed.
Ensure the exhaust filter is
correctly installed or replace it if
damaged.
The pre-filter is missing or
damaged.
Ensure the pre-filter is correctly
installed or replace if damaged.
The air inlet filter is missing or
damaged.
Ensure the air inlet filter is
correctly installed or replace if
damaged.
The power cord cannot be
retracted.
The power cord is stuck.
Release the power cord and
retract it again.
The winding direction is
reversed.
Winding in the exact direction.
Retract the power cord too fast. Retract the power cord slowly.
Low suction power and high
operating noise / vibrations.
Dust bag is full. Replace the dust bag.
Suction nozzle, hose, or tank
inlet is blocked.
Check the suction nozzle, hose,
and tank inlet for obstructions.
The pre-filter or air inlet filter
needs to be cleaned.
Check and clean the pre-filter and
air inlet filter. Replace if damaged.
The accessories such as hose,
floor nozzle and extension
wand or the power head are not
installed into place, causing air
leakage.
Install each part correctly.