7.1.
Verify that the power cord is disconnected from the outlet. (fig.1)
7.2.
Disconnect the hose from the vacuum, turning large end in
counter clockwise direction. (fig.2)
7.3.
Undo the latches and remove the power head from the container. (fig.3)
7.4.
Clear all dirt or debris from the container and hose. (fig.4)
7.5.
Check the hose, attachments, and power cord to verify that they have
not been damaged.
Installing Cartridge Filter
1
Verify that the power cord is disconnected from the outlet. (fig.1)
2
Remove power head and place in upside down position.
3
Install the cartridge filter over the filter cage with the flat end of the filter
towards the vacuum power head. Carefully push filter in until it stops against the
power head. (
fig.2 & 3)
4
Place filter retainer on top of cartridge filter over the raise lip and tighten
down by turning retainer clockwise, do not over tighten. (fig. 4 & 5)