12
ARY, Inc. | 11880 College Blvd Suite 550 Overland Park, KS 66210 | www.VacMasterFresh.com | 800-821-7849
VP
680 Chamber Vacuum Sealer
|
User Guide
How to Use
Programmable Vacuum Cycle Instructions
This VacMaster chamber vacuum sealer is now equipped with a new
feature that allows you to program and store up to 10 different seal cycle
settings. Changing from liquids to solids to delicate items has never
been easier to get that perfect amount of vacuum and a double seal for
an additional layer of protection.
Also included is an oil change alert that, after 250 uses, reminds you to
change the oil. This reminder is intended to keep your machine in tip-
top shape. As a rule of thumb change your oil at the 250 uses alert or
after 3 months whichever comes first.
CO Code -
This stands for change oil.
Once complete, press "Set" " Up" "Down" (all 3) at the same time for 3
seconds. This will reset and clear this code.
Mpa
1
2
3
4
5
Instructions
1. Press the program button on the right side of the control panel to
bring up P0 on the LED Display.
2. Press the SET button to change your desired vacuum time. Use up or
down arrows to adjust desired vacuum time.
3. Press SET again to change the seal time. Use up or down arrows to
adjust desired seal time.
4. Press SET button again to change your cool-down time. Use up or down
arrows to adjust desired cool-down time. Add at least 1 Second more to
cooling time over sealing time.
5. Press SET one last time to save the settings.
6. You are now ready to vacuum seal.
7. To create a new preset, press the program button to change to P1 and
repeat the process stated above.
8. Set up and save up to 10 unique settings.
9. To change programmed setting, simply press the program button
