Vacmaster VP325, Руководство оператора

Страница: 6 / 16

Safety Precautions
For your safety, follow these precautions when using your
VacMaster ® VP325:
▪ Read Operator’s Guide carefully before using the machine for
the fi rst time.
▪ Do not use the VP325 on wet or hot surfaces, or near a heat source.
▪ Do not immerse machine or power cord in water or any other liquid.
▪ Plug VP325 into grounded power sources only.
Do not use extension cord.
▪ To disconnect, unplug directly from power source. Do not disconnect
by pulling cord.
▪ Do not operate machine with damaged power cord.
▪ Only use VacMaster
®
vacuum pouches and accessories.
▪ Do not allow to be used as a toy. Close supervision is necessary
when used by or near children.
▪ Only use VP325 for its intended use.
Gas Flush System
Products which would be damaged by high pressure must be subjected to a lower
vacuum or the pressure must be counterbalanced by in
fl ating the bag with inert gas.
The gas fl ush system is designed to remove the oxygen and replace it with a mixture
of Carbon Dioxide and Nitrogen to extend shelf life and provide a higher quality
product to the consumer. This is bene
fi cial when packaging items that shouldn’t be
compressed. This includes but is not limited to soft fruits, dried foods, chips, pasta,
and pre-cooked meals. By adding a mixture of Carbon Dioxide and Nitrogen, the food
will stay fresh longer while keeping its original shape.
How To Use:
Consult your local authorized gas supplier for assistance in buying, regulating, and
connecting the gas to the machine.
Gas Fill Operating Instructions:
Connect the required gas cylinder, (complete with regulator), to the machine by hose.
The Regulator may never be set more than atmospheric pressure, approximately 14
psi. The appropriate level should be between 5 and 12 psi.
To add gas fl ush to the normal operating cycle, follow the operating instructions. If
there is no gas fl ush time set, there will be no gas fl ush in the process of sealing.
To use the gas fl ush add increments of .1 seconds to the timer. It may take several
adjustments to get the package to the desired fi ll level.