background image

13

ARY, Inc.  |  5200 W 110th Street Suite 200, Overland Park, KS 66211  |  www.VacMasterFresh.com  |  800-821-7849

VP321 Chamber Vacuum Sealer | 

User Guide

VP321 will not turn on - 

 

Make sure the machine is properly plugged into a grounded outlet.

 

Check the power cord for tears and frays. Do not use this machine if 

the power cord is damaged.

 

Make sure the power switch is turned on. The LED screen will be 

illuminated when on.

 

If you see ‘F1’ displayed on the LED screen and the machine will not 

function, make sure the lid is open and turn the power off.  Turn the 

machine back on and it should return to working order.

VP321 does not pull a complete vacuum with pouch -

 

The vacuum time may not be set high enough.  Set the vacuum time 

higher and vacuum again.

 

To vacuum and seal properly, the opening of the pouch must be 

within the vacuum chamber.  For detailed instructions, refer to 

"

How 

To Use the VacMaster

®

 VP321 Chamber Vacuum Sealer

"

.

 

The seal bar, lid gasket and vacuum pouch need to be clean, dry and 

free of debris for the vacuum process to be successful.  Wipe surface 

of the seal bar, lid gasket and the inside of the pouch and try again.

Vacuum pouch loses vacuum after being sealed -

 

Sharp items can poke small holes in pouches.  To prevent this, 

cover sharp edges with a paper towel or VacMaster

"

 Bone Guard and 

vacuum in a new pouch.

 

Some fruits and vegetables can release gases (out-gassing) if not 

properly blanched or frozen before packaging.  Open the pouch.  If you 

think food spoilage has begun, discard the food.  If food spoilage has 

not yet begun, consume immediately.  If in doubt, discard the food.

VP321 is not sealing pouch properly -

 

The seal time may not be long enough.  Increase the seal time and try 

again.  

 

Pouches will not seal if any moisture, food particles or debris are 

present in the seal area.  Wipe the inside of the pouch clean and  

try again.

 

Pouches must be properly placed along the seal bar.  Make sure the 

entire pouch is over the seal bar and there are no wrinkles in the  

pouch material.

If problems persist, contact customer support at

(800) 821-7849 

for further assistance.  

Troubleshooting

Содержание VP321

























Отзывы: