VACGEN 17HS-006 Mk 3, Руководство по эксплуатации и обслуживанию

Страница: 5 / 13

sales@vacgen.com www.vacgen.com 0044 (0) 1323 379335
34 frame size hybrid stepper motors 34HS series
The 34HS series hybrid stepper motors in the range conform to
the international NEMA standard and provide 200 steps /rev
when used with full step drives or 400 steps per revolution in
the preferred half step drive mode. Where increased torque and
resolution at reduced speed is required a comprehensive range
of planetary gearheads may be specified. The internal
construction has also been optimised for microstepping
resulting in improved smoothness of operation. Suitable for use
with either Uni-polar or Bi-polar drive circuits, the motors
incorporate design features such as loop-less termination of the
motor windings to internal circuit boards for increased
reliability. Despite the high quality of the latest generation
34HS
series , the units remain competitively priced and offer a choice
of single or double shaft when encoders or parking brakes are
required.
A comprehensive range of drive and control modules are available for use with HS series motors. These conform to the
International Eurocard standard and may be purchased in modular form or as a complete racked system depending on
customer choice.
Dimensions mm
Specifications: 34HS 1.8 degree stepper motors
motor type length ‘L’
mm
holding
torque
Ncm
rotor
inertia
Kgcm 2
resistance
per phase
ohms
current per
phase
amps
inductance
per phase
mH
number
of leads mass
Kg
34HS-106 ** 62.3 120 0.63 0.95 3.1 3.2 8 1.5
34HS-109 ** 62.3 120 0.63 0.45 4.7 1.3 8 1.5
34HS-209 ** 94.25 220 1.33 0.55 4.6 2.5 8 2.58
Note ** Rear shaft may be specified by adding ‘E’ to part number EXAMPLE: 34HS-209E
+ 0
34 HS
Series