Precautions for Use
★
Before putting items into the equipment, confirm that the temperature in
the storage chamber has reached the set temperature, and then put the
items in batches. Do not put in items for more than 1/3 of the volume of
the chamber at a time to prevent its temperature from rising too much.
★
The equipment temperature display is the temperature at the temperature
sensor in the storage chamber. When the equipment is initially running,
the displayed temperature is somewhat different from the actual tempera-
ture at the center of the equipment. However, as the equipment enters a
stable state, the displayed temperature will gradually approach the actual
temperature.
★
The equipment chamber is designed with a testing hole so that the test
line inside the chamber can be led out for test. After leading out the test
lead, make sure to re-plug the testing hole with insulation material. Other-
wise, the temperature inside the chamber may not reach the temperature
setting and cause condensation around the outside of the through-hole.
★
Please use diluted neutral cleaner to clean the equipment. Do not use
brushes, acid, gasoline, soap powder, polish or hot water to clean this
equipment, otherwise it may damage the painted surface and plastic rub-
ber parts. Special care must be taken not to use volatile solvents such as
gasoline to wipe plastic and rubber parts.
★
Cut off the power when the equipment is not used for a long time, and turn
off the battery at the same time.
★
Try to reduce the opening time of the door for every storage and retrieval
of items to avoid large fluctuations in temperature and humidity inside the
chamber.
★
After the door is opened, the temperature inside the chamber will rise
sharply for a short time, which is normal, and will recover within one hour
after the door is closed.
7