5
2. INSTALLTION
2.1
Handling
1)Protect the Pharmacy
Refrigerator in moving it,Same as shown as left photo, please move it by handcart with cushion
2)Remove all packing materials and bottom cushion, the move into house for placement
3)After moving it to appropriate location, wait for 2 hours before power on.
2.2
Location
When selecting a position for your unit you should make sure the floor is flat and firm, and the room is well
ventilated. Avoid locating your unit near a heat source or radiator. Also avoid direct sunlight as it may Affect the
operation of the whole machine. Extreme cold ambient temperatures may also cause the unit not to perform
properly. This unit is not designed for use in a garage or outdoor installation. Do not drape the unit with any covering.
When installing the unit, ensure that 20 cm of free space is left at both sides, 15 cm at the rear and 20 cm at the top
of the unit. This will allow cold air to circulate around the Pharmacy Refrigerator and improve the efficiency of the
cooling process.
The Pharmacy Refrigerator is only for indoor use. Ambient temperature is within 16°C-32°C, and recommended
temperature is within 18°C-25°C. If necessary, air conditioning system should be used.
Environmental humidity: lower than 80%Rh.
Avoid heavy dust.
Avoid mechanical sway or vibration.
The altitude of working position of Pharmacy Refrigerator is lower than 2000 m.
Input voltage: between (220~240)±10% V.
Ingress protection
：
IPX0
Over Voltage Category
Ⅱ
Pollution Degree 2
The Pharmacy Refrigerator is sensitive to ambient temperature. When installed in other environments than the one
aforesaid, the Pharmacy Refrigerator can't operate normally. Please improve the environment before use.
It is prohibited to install the Pharmacy Refrigerator in an open environment. When the Pharmacy Refrigerator is wet
by rain, it may cause electric leakage or electric shock.