VAC V200 POSITIONER, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 14

92077r14
V200 POSITIONER
www.vacaccessories.com
5
2.3 4-20mA transmitter installation
2.3.1 Gearwheel installation
1. Remove the front cover and indicator
on the V200 positioner. (see page 4)
2. Remove Indicator screw(1).
3. Install the gearwheel(2) so that it aligns over
the cam locking nut screw(3).
4. Secure the gearwheel with the
Indicator screw(1).
2.3.2 Potentiometer installation
1. Install the potentiometer module(4) in
the designed section of the unit as
shown. Tighten the screw that secures
the pot arm and spring.
The pot gearwheel should be aligned
and secured to the larger gearwheel.
2. Install the potentiometer board(5) or the
4-20mA transmitter module(6) into the
designed position and tighten the respective
screws.
3. When used for the 4-20mA feedback, secure
the potentiometer connector(7) to the
transmitter (6). For potentiometer use only,
the connector(7) will attach to the terminal
block(5) and be used with an external position
transmitter.
1
4
3
2
1
5
6
7