![background image](http://html1.mh-extra.com/html/vac-u-boat/vac-u-soling-lower-hull-kit/vac-u-soling-lower-hull-kit_instructions-manual_3106862007.webp)
7
Center the tip of the Deck Liner to the tip of the Deck. Clamp 4 clothespins to the 2nd & 3rd ribs as shown. Check that the
cockpit opening is still centered. Starting at the stern end, alternating left then right, attach clothespins to every other rib
working toward the cockpit.
Carefully set the Deck Liner epoxy-side down into the Deck. Press the four corners of the cockpit opening to align it. Clamp
4 clothespins to the stern-end sides of the deck at these two ribs.
At the bow-end of the deck, put clothes pins on the two ribs shown next to each other. Then continue every other rib to the
bow as shown. Put a single clothes pin at the tip of the bow. Set your paint stirring stick into the cockpit with the left end
(bow end) covering the five locator bumps next to the cockpit opening as shown.
Set your two 15 ounce cans of vegetables on the left (bow) end of the stick as shown. At the stern, place two clothes pins
on the end of the deck one-finger width from the sides. These clothes pins will touch the table and hold the stern-end of
the deck assembly square to the build table.
Clean the brush with alcohol before the epoxy sets!