4 USING THE CHARGING STATION
4.1 ELECTRIC CHARGING BOX WITH CABLE
1. Switch on the charging box (Normal operation of the charging point: always activated)
2. The charging box will start a self-test mode for a few seconds. Immediately, the backlight will
turn green.
BACKLIGHT SIGNALS
ATTENTION:
C
Start the Charge
1.
Select Amp Rated.
With the buttons, you can choose
the Amp Rated for Charging.
2.
Connect the connector to the car.
It will turn blue.
The blue color of the backlight will activate while the
car is connected to the recharging point and the car
does not give you permission to recharge.
3.
When the car is charging the Backlight will be
lilac
and the car will begin to charge. In the display you
can check if the car is charging.
The EVSE is connected and waits to
be connected to the electric
vehicle.
The EVSE is ready to charge. The EVSE
is connected to the car but is waiting
the authorization of the car.
The EVSE is charging. The
cable is connected to the
vehicle.
Ending the charging procedure
The charging procedure will end when unplugging the charging cable from the vehicle. For details, please refer to the
instructions of the vehicle manufacturer.
1.
Unplug the charging cable from the vehicle
Do not use force to pull out a mechanically locked plug!
Keep save charging connector / charging cable
Recharge status
backlight
Charge
Connector
IEC 62196
THERE
IS NO NEED TO DISCONNECT THE RECHARGING POINT FROM THE MAINS. IT CAN BE LEFT
CONSTANTLY ON. HOWEVER, IF IT IS NOT GOING TO BE USED FREQUENTLY FOR SOME TIME, IT IS
ADVISABLE TO TURN IT OFF FROM THE PROTECTIONS.
7
