D
E
U
T
S
C
H
54
MONTAGE DES
FÜHRUNGSPROFILS
1.
Profilteil aus der Verpackungskarton
nehmen und auf Unversehrtheit prüfen.
2.
Profilteil wie in nachfolgender Abbildung
dargestellt öffnen.
3.
Nach dem Ausbreiten des Profilteils das
Verbindungsprofilteil
R
bis zu den beiden
an der Kettenführung markierten
Löchern
Q
gleiten lassen.
4.
Die Spannung der Kette regulieren,
indem man die Sechskantschraube mit
einem 10mm-Schlüssel verstellt: die
Mutter festziehen bis die Kette
ausreichend gespannt ist.
ACHTUNG: sicherstellen, dass der
Schlitten auf der gesamten Länge der
Führung frei läuft.
Eventuelle Reibung vor der Fortsetzung
der weiteren Montagephasen
beseitigen.