V2 city4, Инструкция по эксплуатации

Страница: 20 / 22

ENGLISH
38 38
City4 FUNCTION TABLE
DISPLAY DATA DESCRIPTION
DEFAULT
Ante
DEFAULT
SCor
MEMO
DATA
dEF. no It does not load the V2 standard data no no
SCor Predefined programming for a typical sliding gate
AntE Predefined programming for a typical two-door gate
t.AP 0.0" ÷ 2.0' Gate opening time 22.5" 22.5"
t.APP 0.0" ÷ t.AP Opening time of pedestrian gate 6.0" 6.0"
t.Ch 0.0" ÷ 2.0' Gate closing time 23.5" 23.5"
t.ChP 0.0" ÷ t.Ch Closing time of pedestrian gate 7.0" 7.0"
t.SEr 0.5" ÷ 2.0' Electrical lock operation time 2.0" no
no - Lock is not energized (it corresponds to 0)
t.ASE 0.0" ÷ 2.0' Lock advance time 1.0" 0.0"
t.inv 0.5" ÷ 2.0' Backlash time no no
no - Backlash disabled (it corresponds to 0)
t.PrE 0.5" ÷ 2.0' Pre-flashing time 1.0" 1.0"
no - Pre-flashing disabled (it corresponds to 0)
Pot 30 ÷ 100% Motor power 60 60
SPUn no / Si Start off Si no
t.P.So 0.5" ÷ 3.0" Slowed down starting time no 1.5"
no - Slowed down starting disabled
t.raL 0.5"÷22.5" Slow down time 6.0" 6.0"
no - Slow down disabled
t.CVE 0.0" ÷ 3.0" Fast closing time after slowing down during closing 1.0" 0.0"
St.AP Start in opening PAUS PAUS
no - Start command is not available
ChiU - Command close gate
PAUS - Stop the gate and goes in pause
St.Ch Start in closing StoP StoP
Stop - Start command stop the gate
APEr - Start command open the gate
St.PA Start in pause ChiU ChiU
no - Start command is not available
ChiU - Start command closes the gate
SPAP Pedestrian in opening PAUS PAUS
no - Pedestrian start command is not available
ChiU - Pedestrian start command closes the gate
PAUS - Gate goes in pause
Ch.AU Automatic closing no no
no - The gate closes after the setup time)
0.5"÷ 20.0' - The automatic closing is not active (it corresponds to 0)
Ch.tr Closing after passage no no
no - Closing after passage disabled
0.5"÷ 20.0' - Gate stop for a time to be set between 0.5" to 20'
PA.tr no/Si Pause after transit no no
LUCI Courtesy Light
t.LUC - Lights start time adjustable from 0 to 20’ 1’00 1’00
CiCL - Lights are on trough the whole cycle
AUS - Auxiliary output
tiM - Timed aux out (from 0 to 20’)
biSt - Aux out relay with bistable functioning
Mon - Aux out relay with monostable functioning
LP.PA no/Si Flashlight in pause no no