![background image](http://html.mh-extra.com/html/v-zug/unimatic-tl-wp/unimatic-tl-wp_operating-instructions-manual_846580017.webp)
6 Drying
Changing programme selection
During programme selection, a programme that has already been selected can be
changed at any time by selecting a new programme. All previously selected settings are
cleared.
Aborting programme selection
▸ Press the
button.
–
Programme selection is aborted.
Duration remaining indicator
During programme selection, the expected duration of a programme is shown. This cor-
responds to a load containing similar wash items with a defined weight.
Depending on fabric type, the actual running time may differ from the duration shown.
The duration remaining shown – especially towards the end of the programme – can
freeze for several minutes.
–
The letter «h» flashes and in the display appears e.g.
.
–
The duration remaining is recalculated and shown.
Selecting an automatic programme
▸ Close the appliance door.
–
The indicator lights for the programme buttons and the additional programme flash.
▸ Press the required programme button.
–
The indicator light for the programme selected illuminates.
–
The likely duration (hours/minutes) appears in the display.
–
The indicator light for the additional function that may be selected flashes for
15 seconds.
A new programme can be selected during this time. All additional functions selec-
ted are cleared and must be reselected.
–
If no button is pressed within 15 seconds, the programme selected starts automat-
ically.
17