Installation instructions
Induction hob with integrated range hood
GKD46TIMASZO - Fusion
1039697-R02
06/09/2018
1039697-R02
5
Flush installation
The layout of the hob to be fitted may differ from the hob illustrated!
825/900
H
X – X
Steel angle mounted
with adhesive or screws
8.5
8.5
+1
0
D
+1
0
C
R0–5
8.5
0
-0.5
8.5
0
-1
Cable length 1.7 m
761
50
1
Y
Ri
X
Y
X
A
825/900
Z
507
±1
≥4
1.5
767±1
≥41
.5
Y – Y
Drawer
B
H
Ra
Detail Z
Side panel
Type
A Depends on producer
B
C/D
H
Corner radius Ra/Ri
GKD46TIMASZO
20–70 mm
≥400 mm
750/490
206 mm
5/1.5 mm
A
Worktop depth
B
Required clearance for service replacement over the entire cut-out area.
H
Dimension from the top of the work surface to the underside of the hob
Ri
Corner radii of appliance
Ra
Outer corner radii of cut-out
W
The intermediate base must be removable from below.
Installation
1.
Create an accurate mounting cut-out.
– The mounting surface can be reamed out or created by installing wood/stone supports or using the steel angle set (see Accessor-
ies).
Access to the appliance from below via the entire cut-out area must be guaranteed. For servicing purposes, the induction gen-
erator can be removed from below with the mounting plate. It must be possible to unscrew the contact-proof covers from be-
low.
2.
Prepare the cut-out and appliance in accordance with the specifications in the enclosed cementing-in instructions.
3.
Carefully cement the appliance in and leave the silicone sealant to dry for at least 24 hours.
4.
Connect to the electrical mains connection before inserting the appliance, if necessary.