Installation instructions
Induction hob with integrated range hood
GKD46TIMASZO - Fusion
1039697-R02
06/09/2018
1039697-R02
11
Extraction mode
There is a danger of toxic fumes developing if the range hood is operated at the same time as an ambient air-depend-
ent firing system!
The conversion kits and suitable flat channel or pipe systems are available for order as accessories.
▪
Only use pipes with a smooth inner surface or flexible duct
hoses made from non-flammable materials for exhaust duct-
work.
▪
To achieve the greatest possible air extraction with the low-
est noise levels, please observe the following:
–
Standard ventilation outlet is by means of flat channel
or pipe.
–
The diameter of the exhaust duct pipe must not be less
than ø150.
–
The exhaust ducting should be as short and straight as
possible.
–
Only use connection elbows with large radii.
–
The exhaust ducting must not be kinked or com-
pressed.
–
Make sure that all connections are secure and airtight.
≤7 m
Any constriction of the airflow will reduce extraction performance and increase operating noise.
If the exhaust duct is to be routed outdoors, we recommend in-
stalling a telescopic wall pipe H42066.
If the exhaust air is to be ducted into a chimney flue, the intake
piece must be aligned with the flow direction of the flue.
▪
If the exhaust duct runs through cool rooms, lofts, etc., there
may be sharp variations in temperature in individual areas.
Vapour and condensation is to be expected. This makes it
therefore necessary to insulate the exhaust ducting / air duct.